|
|
#26
11-04-2009, 01:48 PM
|
||||
|
||||
 you have the top one, but you need the bottom one. Driven is saying to cut off the button on the end of the top one and weld an extension on because it's too short otherwise. I say, just go buy a dang high grade bolt, then cut the head off and round it nicely to seat in the 280zx m/c........like it showed in the 411 thread. http://forum.ratsun.net/showthread.php?t=10314&page=7 starting about post 132.......modding bolt at 143 I'm now going to unsubscribe to this thread.
__________________
Don't have to be too bright to be me!! 
Last edited by mklotz70; 11-04-2009 at 01:54 PM. 
|
|
#27
11-04-2009, 05:02 PM
|
|||
|
|||
|
I think you will struggle more if you're already having trouble with the push rod on the MC.
|
|
#28
11-04-2009, 05:48 PM
|
||||
|
||||
|
welcome to my world
|
|
#29
11-05-2009, 01:31 PM
|
|||
|
|||
|
I just wasn't picturing how it was supposed to look/work. I got it mounted up last night. I cut the head off a bolt, rounded it and it works well with the connector from the stock mc.
I was just over thinking it. Getting in there and doing it made a world of difference. Thanks for putting up with me everyone..
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
